La configuration de la Quality of Service (QoS) sur votre Ubiquiti EdgeRouter Pro pour Aircall commence par le test de votre bande passante disponible, puis par l’application de règles de traffic shaping afin que le trafic Aircall soit priorisé.

Veuillez suivre les étapes ci-dessous et effectuer les tests et modifications en dehors des heures de travail chaque fois que possible.

Étape 1 : Exécuter des tests de bande passante

Avant de configurer la QoS, vous devez mesurer votre bande passante internet réelle.

  • Lancez vos tests en dehors de vos heures de travail afin d’obtenir une évaluation correcte de votre bande passante.
  • Si vous avez déjà défini du traffic shaping ou des règles de pare-feu, désactivez-les avant de lancer ce test.

Étapes :

  1. Accédez à Aircall Network Checker
  2. Exécutez trois tests de vitesse différents à la suite.
  3. Notez chaque résultat de download et d’upload.

Exemples de résultats :

  • Download 97 Mbps / Upload 79 Mbps
  • Download 90 Mbps / Upload 84 Mbps
  • Download 98 Mbps / Upload 76 Mbps

Vous prendrez ensuite en compte le résultat le plus bas, et conserverez 90 Mbps pour le Download et 76 Mbps comme vitesse d’Upload.

Étape 2 : Accéder à la CLI de l’EdgeRouter Pro

Vous pouvez accéder à la CLI de votre Ubiquiti EdgeRouter Pro via l’interface web ou en utilisant SSH.

Exemple de commande SSH :

ssh ubnt@192.168.1.1

Étape 3 : Appliquer la configuration QoS

Vous allez maintenant créer les politiques QoS de download et d’upload, puis les appliquer à vos interfaces.

Si vous copiez-collez les lignes de commande, utilisez uniquement :

  • Les deux premières lignes (configure et top)
  • Le bloc de politique de download
  • Le bloc de politique d’upload
  • Les commandes finales commit et save
Commandes de la politique de download

configure
top

# Setup of the aircall Download policy
set traffic-policy shaper DlAircall description 'Aircall Download QoS policy'
set traffic-policy shaper DlAircall bandwidth 79Mbit
set traffic-policy shaper DlAircall class 2 description 'Class for Aircall servers IP address'
# The value of your class must be at least -> (nb of aircall users) x (100Kbit)
set traffic-policy shaper DlAircall class 2 bandwidth 5000Kbit
set traffic-policy shaper DlAircall class 2 ceiling 100%
set traffic-policy shaper DlAircall class 2 priority 7
set traffic-policy shaper DlAircall class 2 match Aircall1 ip source address 54.252.254.64/26
set traffic-policy shaper DlAircall class 2 match Aircall2 ip source address 52.65.191.160/27
set traffic-policy shaper DlAircall class 2 match Aircall3 ip source address 52.65.127.160/27
set traffic-policy shaper DlAircall class 2 match Aircall4 ip source address 52.205.63.192/26
set traffic-policy shaper DlAircall class 2 match Aircall5 ip source address 177.71.206.192/26
set traffic-policy shaper DlAircall class 2 match Aircall6 ip source address 54.233.255.192/27
set traffic-policy shaper DlAircall class 2 match Aircall7 ip source address 54.233.191.0/27
set traffic-policy shaper DlAircall class 2 match Aircall8 ip source address 54.171.127.192/26
set traffic-policy shaper DlAircall class 2 match Aircall9 ip source address 52.215.127.0/24
set traffic-policy shaper DlAircall class 2 match Aircall10 ip source address 35.156.191.128/25
set traffic-policy shaper DlAircall class 2 match Aircall11 ip source address 52.58.255.224/27
set traffic-policy shaper DlAircall class 2 match Aircall12 ip source address 52.59.63.224/27
set traffic-policy shaper DlAircall class 2 match Aircall13 ip source address 54.65.63.192/26
set traffic-policy shaper DlAircall class 2 match Aircall14 ip source address 54.169.127.128/26
set traffic-policy shaper DlAircall class 2 match Aircall15 ip source address 52.220.63.128/26
set traffic-policy shaper DlAircall class 2 match Aircall16 ip source address 54.172.60.0/23
set traffic-policy shaper DlAircall class 2 match Aircall17 ip source address 34.203.250.0/23
set traffic-policy shaper DlAircall class 2 match Aircall18 ip source address 52.9.254.64/26
set traffic-policy shaper DlAircall class 2 match Aircall19 ip source address 3.122.181.0/24
# Remaining of your bandwidth come here
set traffic-policy shaper DlAircall default bandwidth 74Mbit
set traffic-policy shaper DlAircall default ceiling 100%

Commandes de la politique d’upload

# Setup of the aircall Upload policy
set traffic-policy shaper UlAircall description 'Aircall Download QoS policy'
set traffic-policy shaper UlAircall bandwidth 74Mbit
set traffic-policy shaper UlAircall class 2 description 'Class for Aircall servers IP address'
# The value of your class must be at least -> (nb of aircall users) x (100Kbit)
set traffic-policy shaper UlAircall class 2 bandwidth 5000Kbit
set traffic-policy shaper UlAircall class 2 ceiling 100%
set traffic-policy shaper UlAircall class 2 priority 7
set traffic-policy shaper UlAircall class 2 match Aircall1 ip destination address 54.252.254.64/26
set traffic-policy shaper UlAircall class 2 match Aircall2 ip destination address 52.65.191.160/27
set traffic-policy shaper UlAircall class 2 match Aircall3 ip destination address 52.65.127.160/27
set traffic-policy shaper UlAircall class 2 match Aircall4 ip destination address 52.205.63.192/26
set traffic-policy shaper UlAircall class 2 match Aircall5 ip destination address 177.71.206.192/26
set traffic-policy shaper UlAircall class 2 match Aircall6 ip destination address 54.233.255.192/27
set traffic-policy shaper UlAircall class 2 match Aircall7 ip destination address 54.233.191.0/27
set traffic-policy shaper UlAircall class 2 match Aircall8 ip destination address 54.171.127.192/26
set traffic-policy shaper UlAircall class 2 match Aircall9 ip destination address 52.215.127.0/24
set traffic-policy shaper UlAircall class 2 match Aircall10 ip destination address 35.156.191.128/25
set traffic-policy shaper UlAircall class 2 match Aircall11 ip destination address 52.58.255.224/27
set traffic-policy shaper UlAircall class 2 match Aircall12 ip destination address 52.59.63.224/27
set traffic-policy shaper UlAircall class 2 match Aircall13 ip destination address 54.65.63.192/26
set traffic-policy shaper UlAircall class 2 match Aircall14 ip destination address 54.169.127.128/26
set traffic-policy shaper UlAircall class 2 match Aircall15 ip destination address 52.220.63.128/26
set traffic-policy shaper UlAircall class 2 match Aircall16 ip destination address 54.172.60.0/23
set traffic-policy shaper UlAircall class 2 match Aircall17 ip destination address 34.203.250.0/23
set traffic-policy shaper UlAircall class 2 match Aircall18 ip destination address 52.9.254.64/26
set traffic-policy shaper UlAircall class 2 match Aircall19 ip destination address 3.122.181.0/24
# Remaining of your bandwidth come here
set traffic-policy shaper UlAircall default bandwidth 69Mbit
set traffic-policy shaper UlAircall default ceiling 100%

Appliquer les politiques aux interfaces

# Apply policies to your interfaces
# Here we assume eth1 is your internet interface and eth0 is your LAN interface
set interfaces ethernet eth1 traffic-policy out UlAircall
set interfaces ethernet eth0 traffic-policy out DlAircall

commit
save

Étape finale

Une fois que vous avez exécuté les commandes ci-dessus et enregistré la configuration, votre Ubiquiti EdgeRouter Pro est configuré pour prioriser votre communication Aircall.